Terek Brand Portable Air Powered 200-300bar Oxyge | RFQ Sourcing Details

Company Info. Overview Product Parameters Overview Basic Info. Model NO.

GU-GTB-200 Max.Head 400 L/min Pressure Medium Gas Type Handheld Position of Pump Shaft Reciprocating Pump Certification CE, ISO Power Air Compressor Theory Reciprocating Pump Pressure Source Terek Gas Booster Pump Application Pressurize Various Gas Media Pressure Measure ±0.5% Fs Pressure Gauge Driven Air Pressure 3-8bar Diameter of Drive 160mm Material Stainless Steel and Aluminum Transport Package Wooden Case Specification Stainless Steel Frame Trademark TEREK Origin Jinan HS Code Production Capacity 2000 Pieces/Year Packaging & Delivery Package Size 56.00cm * 45.00cm * 56.00cm Package Gross Weight 45.000kg Product Description Product Description The Terek gas booster equipment uses pure compressed air as the driving power source, and USES gas booster pump as the pressure source, Hydroge ,nitrogen, oxygen, helium,N2O,Argon, CO2 and other gases as the pressurized medium.

The output pressure is proportional to the driving gas pressure. By adjusting the pressure of the driving gas source, the corresponding pressure of the pressurized gas can be obtained.

When the pressure of the driving gas source is balanced with that of the pressurized gas, the pneumatic booster pump will be automatically stops and the output gas pressure is stabilized at the preset pressure.

Therefore, it has the features of explosion-proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

To operate this system, The drive gas from the air compressor is required to start the Terek booster pump. The pressure of the drive gas can be adjusted by valves and pressure gauges, and the output gas pressure can be adjusted The expected working pressure can be achieved by adjusting the pressure of the drive inlet..

When the driving air pressure and the output pressure are balance, the pump stops filling pressure and the output pressure remains at the preset value. TEREK gas booster pump uses compressed air to drive large area end piston to small area end to get high pressure gas output..

Can be used for compressed air and other gas, the output pressure can be adjusted by inlet valve, The output can ensure gas is not contaminated. Automatic pressure maintaining. Driven by gas, No spark or Flame and No generating heat, Can use it in dangerous places.

Product Parameters Product parameters Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is reciprocating , The automatic reciprocating motion of the piston is controlled by a built-in four-way valve.

TEREK pumps are air driven at a drive air pressure of 3 to 8 bar (29 to 116 psi) by the normal air compressor.

Model Pressure ratio Min inlet pressure Max inlet pressure O utlet pressure Bar Flow rate NL/min Pa=6bar Connection thread Weight KG Bar Psi Bar Psi Driven Inlet Outlet GU-GTB-02 2: (Ps=6bar) ZG1/2 NPT1/2 NPT1/2 41.6 GU-GTB-05 5: (Ps=6bar) ZG1/2 NPT1/2 NPT1/2 40.2 GU-GTB-06 6: (Ps=6bar) ZG1/2 NPT3/8 NPT3/8 37.2 GU-GTB-10 10: (Ps=20bar) ZG1/2 NPT3/8 NPT3/8 33.8 GU-GTB-16 16: (Ps=20bar) ZG1/2 NPT1/4 NPT1/4 35.4 GU-GTB-25 25: (Ps=20bar) ZG1/2 NPT1/4 NPT1/4 36.5 GU-GTB-40 40: (Ps=20bar) ZG1/2 NPT1/4 NPT1/4 37.2 GU-GTB-60 60: (Ps=20bar) ZG1/2 NPT1/4 NPT1/4 35.5 GU-GTB-100 100: (Ps=20bar) ZG1/2 NPT1/4 NPT1/4 3 4 .6 GU-GTB-200 200: (Ps=40bar) ZG1/2 NPT1/4 NPT1/4 46.0 P a=Drive Pressure Ps=Gas Supply Pressure Po=Outlet Gas Pressure Refer to model technical parameters.

Product name Pneumatic Air driven gas booster pump Pressurized transfer and filling equipment. Model GU-GTB-200 Pressure ratio 200:1 Drive air source pressure 3-8 bar. Maximum outlet pressure 1600 bar (23200 psi) When the driven air pressure is 5.0bar High pressure outlet pressure is 1000bar.

When the driven air pressure is 6.0bar High pressure outlet pressure is 1200bar.

Min gas inlet pressure 35 bar Max gas inlet pressure 800 bar Outlet pressure Control unit Drive air regulator valve Power source TEREK gas booster pump Pressure control accuracy less than 1%F.S;Pressure measurement accuracy 0.4 pressure gauge Valves and piping High pressure needle valve and stainless steel piping Weight 39 KG Export wooden case Weight 45 KG Equipment Dimension 580*450*570 mm Packing size: 610*500*600 mm Packing Specifications Standard export wooden case Connection size(inch) Gas inlet NPT1/4 Connection size(inch) Gas Outlet NPT1/4 Production time 12-15 days.

System configuration: TEREK gas booster pump uses compressed air to drive large area end piston to small area end to get high pressure gas output.. Can be used for compressed air and other gas, the output pressure can be adjusted by inlet valve, The output can ensure gas is not contaminated.

Automatic pressure maintaining. Driven by gas, No spark or Flame and No generating heat, Can use it in dangerous places.

GU-GTB series gas booster unit control cabinet mainly includes one sets of GTB series air-driven gas booster pump, pressure gauges, air filter, gas inlet filter, control valves, air regulating valve, pipelines, cabinet, and pressure release valve etc.

In order to ensure the long-term use and stable working efficiency of the equipment, we provide a set of sealing accessories, repair kit, sealing tape, etc . Detailed Images Product advantages 1. All pipes and fittings are made of stainless steel to ensure a long life 2.

The pump will stop working automatically when the output pressure reaches the preset value, 3. Maintain long working hours with no energy expenditure 4.No dissipated heat during the pressure holding phase 5.No risk for explosion and spark in oil and gas field 6.

The pump will start automatically when the outlet pressure drops slightly or the air drive pressure increases. 7. The working pressure can be adjusted by adjusting the pressure of the driven air.

8.Easy to install, move, use and maintain Application Fields 1.Pressure test with gas 2.Gas transfer and filling(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.) 3.Charging of gas cylinder and accumulator with nitrogen 4.Supply for isolating gas systems 5.

High pressure gas injection system for various industries 6.Transfer of oxygen cylinders 7.Charging of breathing air bottles 8.Leak test 9.Hydrostatic Testing for valves, tanks