YTES BB1 Heavy-Duty Horizontal Double-Suction Spl | RFQ Sourcing Details
Industrial Pumps · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Industrial Pumps. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The YTES BB1 is described as a heavy-duty, single-stage centrifugal water pump with a horizontal shaft, axially split casing, and closed double-suction impeller. Its combined horizontal split construction is intended to permit internal inspection and maintenance without disturbing connected piping.
The listing also describes a centerline-mounted casing, a heavy-duty bearing assembly, and a choice of oil or grease lubrication.
Supported configuration and operating information includes an API 610 / ISO 13709 design basis, flow up to 15,000 m³/h, head up to 200 m, design pressure up to 50 bar, rotational speed from 493 to 2,950 rpm, and a stated temperature range of -40°C to +200°C.
Seal options are described as mechanical seal or packed gland. The product attributes identify middle-pressure service, suction mounting height, and a maximum capacity above 400 L/min.
The listing names municipal water supply, circulating-water systems, power plants, industrial water service, HVAC circulation, irrigation, drainage, flood control, and fire-water supply as intended service areas.
The product title describes a diesel-driven pump, while the attribute table identifies the driving type as motor. Buyers should therefore confirm the exact driver included in the offered package, along with driver power, speed, fuel or electrical requirements, coupling, baseplate, controls, and starting equipment.
The required hydraulic duty point should be matched against a certified pump curve rather than relying only on maximum flow and head values.
Before ordering, confirm the wetted-part and casing materials, flange standard and sizes, shaft and bearing arrangement, seal plan, lubrication method, allowable solids, liquid properties, ambient conditions, and any hazardous-area requirements.
Also request the exact model datasheet, dimensional drawing, package weight, inspection and test plan, performance-test acceptance criteria, documentation list, and confirmation of which standards or certificates apply to the specific ordered unit.
The stated package dimensions are 350 × 160 × 180 cm with a gross weight of 2,800 kg, but these should be verified for the selected configuration. An 18-month warranty and after-sales service are listed;buyers should confirm the warranty start point, scope, exclusions, and service procedure in the purchase contract.
YTES | Applications and Buyer Notes
YTES is organized as a sourcing-ready Industrial Pumps reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions b
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Industrial PumpsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- YTESBased on visible page data; confirm exact value in the RFQ.
- Stages
- Single-stageBased on visible page data; confirm exact value in the RFQ.
- Impeller
- Closed, double-suctionBased on visible page data; confirm exact value in the RFQ.
- Pump type
- BB1 horizontal axially split case centrifugal pumpBased on visible page data; confirm exact value in the RFQ.
- Seal options
- Mechanical seal or packed glandBased on visible page data; confirm exact value in the RFQ.
- Design pressure
- Up to 50 barBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Pumps categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Actuators And Process Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Valves categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Pipe Fittings And Flanges categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path High Pressure Flow Meters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 Stainless Steel Ball Type Hygienic Check Valve Valvula De Retencion Higienica Tipo Bola De AceroThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Pump Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Flow Control Equipment Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 2 2 Kw Food Processing Rotary Lobe Pump For Chocolate Syrup And PastesThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 268 6691 Hydraulic Pump Piston Pump For Cat 24m ImplementThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Stainless Steel Union Type Sanitary Check Valve Valvula De Retencion Sanitaria Tipo Union De AceThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
S/SH Single-Stage Double-Suction Horizontal Split-Case Centrifugal PumpRequest Quote
PSC High-Flow Horizontal Double-Suction Split-Case Centrifugal PumpRequest Quote
Heavy-Duty Centrifugal Slurry Pump for Mining and DewateringRequest Quote
QI Single-Stage End-Suction Centrifugal Water PumpRequest Quote
DLM80/AA/EB Bolted Air-Operated Double-Diaphragm Pump with Aluminum Wetted PartsRequest Quote
NVICKS V Series Double-Acting Hydraulic Vane PumpRequest QuoteFlowGearSource related sourcing paths
FlowGearSource procurement phrases
FlowGearSource related product samples
Pneumatic diaphragm pumps, equipped with simple and highly reliable air reversing valves, realize the largest reliabilit...
Industrial Pumps Strong Acid Alkali Corrosive Liquid Fluid Transfer Industrial Air Pressure Diaphragm Pump - Pneumati* ldeally suited for intermittent/on-demand, portable modera * Simple air distribution system design, minimal moving par...
Industrial Pumps Industrial Horizontal Single Stage Fire Pump with Stainless Steel Impeller and Shaft - Pump and FireIndustrial Horizontal Single Stage Fire Pump with Stainless Steel Impeller and Shaft [Overview] ♦ XBC series diesel engi...
Industrial Pumps GHD2 Oil Gear Pump Dependable Performance for Optimal Fluid Transfer in Industrial Applications - GeProduct Parameters Nominal Size Parameters Sym. Unit GHD2 5 1 GHD2 5 6 GHD2 6 1 GHD2 71 GHD2 8 2 Actual displacement Vg ...
Industrial Pumps Durable G-Type Screw Pump for Industrial Applications and More - G-Type Screw Pump and Advanced G-Tyof Screw Pump Screw pumps are fluid transfer devices designed based on the principle of positive displacement. With thei...
Industrial Pumps Forced Circulation Axial Flow Pump for Industrial Evaporator Equipment - Tube Axialc and Forced CircAFH9500 Developed specifically for loop reactor circulation, the AFH9500 high-pressure axial flow pump delivers increase...