Jr Slip Ring Wound Rotor Three Phase AC Electric | RFQ Sourcing Details

Details The series JR is a wound rotor 3-phase asynchronous motor meeting technical specifications of ministerial standard JB563-64, which can drive ventilator, compressor, water pump, crusher, ball mill, cutting machine, transportation machinery and other equipment and can be used as a primary mover in mechanical industry, power station and various industrial & miming enterprises.

The ratings of the series are based on the values in continuous duty (S1): power 50HZ, rated voltage 220V/380V, 380V, 3000V & 6000V. And we can design motors with voltage rating 3300V/10000V as required by customers.

This series adopts a protection class IP23 for its enclosure;a cooling mode IC01;and ordinarily adopts a structuring and mounting mode IMB3. And we can design it into a vertical mount as required by customers. he series JR guarantees, at rated voltage, the ration of the maximum torque to rated torque not less than 1.8.

A starting rheostat must be connected into the rotor circuit in advance before the series JR is started, the starting mode based on short direct connection to rotor windings may not be allowed.

Installation method: B3 (horizontal installation) Ambient temperature: ≥ -15 ° C and ≤ 40 ° C The deviation of the rated voltage of the YRQ ball mill motor does not exceed 5%, the allowable deviation of the frequency is 1%, and the sum of the absolute values of the deviations does not exceed 5%.

YRQ ball mill motor adopts rotor string resistance full-voltage start-up, which has the advantages of small starting current, large starting torque, high efficiency, low noise, low vibration, good ventilation performance, reliable operation and convenient installation and maintenance.

JR11~15 380 V low voltage wound rotor slip ring motor JR2 380 V low voltage wound rotor slip ring motor, frame size 355~400.

JR13~15 6 Kv high voltage slip ing wound rotor motor JR13~15 6.6 Kv high voltage slip ring wound rotor motor JR13~15 10 Kv high voltage slip ring wound rotor motor 1 Model Number JR SERIES 2 Type Three phase Motor 3 Place of Origin China (mainland) 5 Insulation Class Class B/F/H 6 Frequency 50HZ 7 Efficiency IE2 & IE3 8 Output Power 50KW-4000KW or on request 9 Phase Three Phase 10 Pole 2P, 4P, 6P, 8P, 10P, 12P 11 Wire 100% copper 12 Protection Class IP44/IP54 13 Cooling Method IC411,IC416,IC0041,IC01,IC611,ICW81A 14 Duty: S1 (continuous) 15 Certification ISO, SABS, C