ASW Electric High-Pressure Vertical Submersible S | RFQ Sourcing Details

The ASW electric vertical submersible sewage pump is intended for industrial, municipal, residential and construction drainage duties involving sewage, wastewater or dirty water.

The listed hydraulic configuration is a single-stage, single-suction centrifugal pump with a closed impeller, vertical shaft position, motor drive and mechanical seal.

Published selection limits state a maximum head range of 50–80 m, capacity above 400 L/min and an outlet size up to DN500;the exact duty point and outlet size must be confirmed for the selected model. Several functional configurations are described.

The standard closed-flow-channel impeller version is intended for media containing long fibers and large solid particles. Other listed options add a cutter, mixer, combined cutter and mixer, or an anti-flushing device.

The cutter is described as shredding materials such as paper, textiles and other long fibers during pumping. The mixer is intended to combine settled material with pond liquid before discharge.

The anti-flushing configuration directs a high-pressure water flow into the pit to agitate accumulated sludge and floating material. Listed applications include factory and industrial wastewater drainage, municipal sewage systems, residential drainage, flood drainage, hospitals, ho ing.

The broader liquid-service listing includes sewage, dirty water, drainage water, clean water, seawater and chemical-processing liquids. Suitability must be checked against the actual liquid composition, solids profile, temperature and corrosion conditions.

Available pump-part materials are listed as cast iron, ductile iron, stainless steel 304 and stainless steel 316. The broader specification also mentions duplex steel. Electrical options include 50 or 60 Hz and listed voltages of 220, 240, 380, 400 or 440 V, with other voltage requirements available.

The motor enclosure is listed as IP68. Shaft material may be carbon steel or stainless steel. For procurement, provide the required flow, total head, pumped medium, solids and fiber characteristics, operating conditions, installation arrangement, electrical supply and quantity.

Confirm the exact ASW model, impeller or auxiliary-device configuration, wetted-part materials, motor rating, outlet diameter, allowable solids size, cable details, controls, dimensional drawing and package weight before ordering.

Also confirm whether the published package dimensions of 110 × 55 × 76 cm and gross weight of 380 kg apply to the selected configuration.

Customization is listed as available, and the stated warranty period is one year;buyers should obtain the precise customization scope, warranty coverage and after-sales terms in the order documentation.