Shaft Mounted Planetary Gear Servo Gearbox Motor | RFQ Sourcing Details

Description: PS.F/PS.C series planetary servo gear units Our servo gear units are highly precise, powerful and extremely compact. They deliver high torques at high speeds while absorbing high overhung loads. Their extremely high reliability makes them the ideal unit!

Low-backlash planetary servo gear units – remarkably effective!

High speeds and torques combined with precision and efficiency: Our two series of compact planetary servo gear units offer you a huge number of possible solutions, as well as a range of motor mounting options with the EPH motor adapters for PS.F and the ECH adapters for PS.C.

With consistently low rotational clearance, high torsional rigidity and a high level of efficiency, these highly precise and extremely powerful servo gear units constitute an optimal basis for a variety of servo drives.

The PS.F planetary servo gear units are designed for nominal torques of 25 Nm to 3,000 Nm;the PS.C series is designed for nominal torques of 30 Nm to 320 Nm. All gear ratios from i = 3 to i = 100 are integers and finely stepped.

This means that the servo gear units are particularly suitable for use with controllers that require integer resolution ratios. Only half the solution without a motor? Then take advantage of our modular concept and combine the servo gear units of the BS.F and PS.C series with the dynamic servomotor of your choice.

High speeds and torques combined with precision and efficiency: Our two series of compact planetary servo gear units offer you a huge number of possible solutions, as well as a range of motor mounting options with the EPH motor adapters for PS.F and the ECH adapters for PS.C.

With consistently low rotational clearance, high torsional rigidity and a high level of efficiency, these highly precise and extremely powerful servo gear units constitute an optimal basis for a variety of servo drives.

The PS.F planetary servo gear units are designed for nominal torques of 25 Nm to 3,000 Nm;the PS.C series is designed for nominal torques of 30 Nm to 320 Nm. All gear ratios from i = 3 to i = 100 are integers and finely stepped.

This means that the servo gear units are particularly suitable for use with controllers that require integer resolution ratios.

Technical data Type designation P5KG41-0010/N/S/0 HN12.01 Gear ratio 10 Nominal torque MaN [Nm] 174 Nominal speed neN [1/min] 2800 Peak torque Mapk [Nm] 270 Peak rotational speed nepk [1/min] 5500 Nominal radial load M FRan [N] 5890.00 Peak radial load F Frapk [N] 6930.00 Backlash [arcmin] 3.00 Service life [h] 20000 Main bearing type Bearing type 1/line .00 Output shaft end [mm] 32/58 Design type P.KG..

Solid shaft with keyway Maximum permitted insertion depth [mm] 50 Mounting position M0, Universal mounting position Weight [Kg] 7.8