NVICKS SQP43 Fixed-Displacement Double Hydraulic | RFQ Sourcing Details

The NVICKS SQP43 is a fixed-displacement, double-acting hydraulic vane pump intended for industrial hydraulic systems. The listed maximum operating figures are 17.2 MPa pressure and 1,800 rpm speed.

Its cast-iron construction and double-pump configuration make it a candidate for hydraulic power units and equipment requiring two pump sections. The SQP range includes single-pump models SQP1, SQP2, SQP3, and SQP4, plus double-pump models SQP21, SQP31, SQP32, SQP41, SQP42, and SQP43.

For the SQP43, the listed shaft-end flow codes are 42, 45, 50, 57, 60, 66, and 75, while the cover-end flow codes are 21, 25, 30, 32, 35, 38, and 45.

Available order-code choices shown in the source information include SAE four-bolt flange port connections, straight-keyed or splined shaft configurations, selectable outlet positions, and left- or right-hand rotation. The pump is described for hydraulic machinery and engineering machinery.

Other stated uses for the SQP series include machine tools, presses, die-casting machines, plastic injection-molding equipment, heavy equipment, mining machinery, rubber and plastics machinery, shoe machinery, metallurgical machinery, and metal-cutting machinery.

The series is presented as a low-noise design using a revised configuration to reduce pulsation and noise, with a strengthened housing intended to improve vibration resistance.

The supplied product information describes SQP-series pumps and their internal parts as interchangeable with corresponding Tokimec SQP products, with the same connecting dimensions. It also states that cartridge kits, shafts, seals, bearings, and other internal parts can be replaced with corresponding original parts.

Buyers should treat this as a configuration-dependent compatibility statement and verify the complete model code, mounting interface, shaft, port arrangement, displacement combination, rotation, and outlet orientation before ordering.

Procurement confirmation is essential because SQP43 identifies a series configuration rather than every build detail. Ask for the complete order code and a dimensional drawing for the offered unit.

Confirm the required shaft-end and cover-end flow codes, actual displacement or flow at the intended operating point, working pressure, inlet conditions, fluid specification, temperature range, filtration requirement, noise data, and expected service duty.

Also verify whether the quoted assembly includes any accessories, cartridge kits, seals, or mounting hardware. Customization is stated as available. The listed transport packaging is a carton and wooden case, with package dimensions of 80 × 60 × 40 cm and a gross package weight of 30 kg.

A one-year warranty and online technical support are stated;buyers should confirm the warranty start date, scope, exclusions, and service procedure in the purchase documentation.