D escription : The self-propelled hot | RFQ Sourcing Details

D escription : The self-propelled hot melt spraying machine adopts the principle of centrifugal roller spraying, and generates centrifugal force to spray the paint to the road surface to form a coating film through high-speed rotation of the biaxial gear.

Using jet spraying, smooth line, neat edge, uniform thickness, good bead adhesion effect. With the rapid development of traffic, most of the high grade pavement adopts coarse gravel permeable pavement. The technology of thin sealing layer is adopted in middle school pavement repair.

It brings a new subject to our road marking material quantity. Using the new process of hot melt spraying, not only saves material, but also has good eye drainage and good reflection. Product characteristics : 1. Imported stepless transmission drive, forward, backward, stop, control freely. 2.

Spray hopper does not , especially suitable for gravel pavement and other rough road surface, smooth line, neat edge, high construction efficiency. 3. Spray hopper does not , especially suitable for gravel pavement and other rough road surface, smooth line, neat edge, high construction efficiency. 4.

Spray hopper does not , especially suitable for gravel pavement and other rough road surface, smooth line, neat edge, high construction efficiency.

Latest Product Parameters Engine 5.5HP engine Driving device Stepless speed change Maximum Angle of climb 18° Paint bucket capacity 100kg Marking width 15cm-45cm Thickness regulation 1.2-2.5mm Dimension 1.3*0.93*0.1m Engine : 5.5HP engine, providing sufficient power for smooth operation.

Driving Device : Features a stepless speed - change system, allowing for flexible and precise speed adjustments according to different working conditions. Maximum Angle of Climb : Capable of climbing slopes with a maximum angle of 18°, demonstrating good off - road and terrain - adapting capabilities.

Paint Bucket Capacity : The paint bucket has a capacity of 100kg, reducing the frequency of paint refills and enabling continuous marking work over longer periods. Marking Width : The marking width can be adjusted within the range of 15cm - 45cm, meeting various marking width requirements for different applications.

Thickness Regulation : The thickness of the marking can be regulated from 1.2mm to 2.5mm, ensuring the creation of markings with appr