G-Series High-Pressure Oil Screw Pump, Models G25 | RFQ Sourcing Details
Industrial Pumps · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Industrial Pumps. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This G-series screw pump is presented as a horizontal, hydraulically driven oil pump for high-pressure service. Available model references include G25-1, G35-1, G40-1, G50-1, G70-1, and G85-1.
The published selection table provides model-specific speed, capacity, shaft power, and motor information at delivery-branch pressures of 0.3 MPa and 0.6 MPa. Published table values vary substantially by model and operating point.
Across the listed entries, rotational speeds run from 121 to 720 r/min, capacities range from 0.53 to 57 m³/h, and shaft-power figures range from 0.22 to 13 kW.
For example, G25-1 entries reach 2.45 m³/h at 720 r/min under the 0.3 MPa column, while G85-1 is listed at 57 m³/h and 545 r/min under the same pressure column. The G85-1 table also lists 50 m³/h, 13 kW shaft power, and a 15 kW motor at 545 r/min under the 0.6 MPa column.
The general listing separa e detailed G25-1 through G85-1 capacity table, so buyers should obtain a confirmed performance curve and datasheet for the exact offered configuration before selection. Customization is stated as available.
The manufacturer reports that pump materials can be selected from multiple alloy families, including Ni-Hard alloy, 304L, 316L, 904L, 2507, duplex-steel series, Monel alloy, titanium, and nickel alloy.
This is a list of available material options, not confirmation that any particular model is supplied in one of them as standard. Procurement confirmation is essential because the source description uses several pump terms, including twin screw, axial flow, oil pump, and chemical pump.
Confirm the exact pumping principle, model designation, wetted-part material, medium properties, required duty point, motor rating, sealing arrangement, and dimensional drawing. The buyer should also verify whether the quoted unit matches the detailed G-series performance table or the broader overview range.
Export plywood packing is stated. The reported manufacturing period is normally 30–120 days depending on order quantity and pump type.
The stated warranty is 12 months after commissioning or 18 months after delivery, whichever occurs first;the applicable start date and commissioning documentation should be agreed in the purchase contract.
G-Series | Applications and Buyer Notes
G-Series is organized as a sourcing-ready Industrial Pumps reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questio
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Industrial PumpsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Drive
- HydraulicBased on visible page data; confirm exact value in the RFQ.
- Pump type
- Oil pump;screw-pump terminology is used in theBased on visible page data; confirm exact value in the RFQ.
- Model series
- G25-1, G35-1, G40-1, G50-1, G70-1, G85-1Based on visible page data; confirm exact value in the RFQ.
- Customization
- AvailableBased on visible page data; confirm exact value in the RFQ.
- Listed gross weight
- 1000 kgBased on visible page data; confirm exact value in the RFQ.
- Listed package type
- Export plywood packing / wooden boxBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Pumps categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Actuators And Process Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Valves categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Pipe Fittings And Flanges categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path High Pressure Flow Meters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 Stainless Steel Ball Type Hygienic Check Valve Valvula De Retencion Higienica Tipo Bola De AceroThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Pump Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Flow Control Equipment Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 2 2 Kw Food Processing Rotary Lobe Pump For Chocolate Syrup And PastesThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 268 6691 Hydraulic Pump Piston Pump For Cat 24m ImplementThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Stainless Steel Union Type Sanitary Check Valve Valvula De Retencion Sanitaria Tipo Union De AceThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VT7B High-Pressure Fixed-Displacement Hydraulic Vane Oil PumpRequest Quote
ETR-VT16 Oil-Free Rotary Vane Vacuum Pump, 550 WRequest Quote
TD50-18G/2 Low-Noise High-Pressure Pipeline Centrifugal PumpRequest Quote
QD Series Horizontal Multistage Centrifugal Pump for High-Head Liquid TransferRequest Quote
TSHY32-6 Multistage Centrifugal Constant-Pressure Water Supply Pump SystemRequest Quote
NVICKS V Series Double-Acting Hydraulic Vane PumpRequest QuoteFlowGearSource related sourcing paths
FlowGearSource procurement phrases
FlowGearSource related product samples
Pneumatic diaphragm pumps, equipped with simple and highly reliable air reversing valves, realize the largest reliabilit...
Industrial Pumps Strong Acid Alkali Corrosive Liquid Fluid Transfer Industrial Air Pressure Diaphragm Pump - Pneumati* ldeally suited for intermittent/on-demand, portable modera * Simple air distribution system design, minimal moving par...
Industrial Pumps Industrial Horizontal Single Stage Fire Pump with Stainless Steel Impeller and Shaft - Pump and FireIndustrial Horizontal Single Stage Fire Pump with Stainless Steel Impeller and Shaft [Overview] ♦ XBC series diesel engi...
Industrial Pumps GHD2 Oil Gear Pump Dependable Performance for Optimal Fluid Transfer in Industrial Applications - GeProduct Parameters Nominal Size Parameters Sym. Unit GHD2 5 1 GHD2 5 6 GHD2 6 1 GHD2 71 GHD2 8 2 Actual displacement Vg ...
Industrial Pumps Durable G-Type Screw Pump for Industrial Applications and More - G-Type Screw Pump and Advanced G-Tyof Screw Pump Screw pumps are fluid transfer devices designed based on the principle of positive displacement. With thei...
Industrial Pumps Forced Circulation Axial Flow Pump for Industrial Evaporator Equipment - Tube Axialc and Forced CircAFH9500 Developed specifically for loop reactor circulation, the AFH9500 high-pressure axial flow pump delivers increase...